Skip to main content
Motor Life Events Community Support
ASK OUR EXPERTS
1-866-464-6553

Fuel Cells

Sort
Availability
Items 1 - 15 of 15 Items
Sort
    1. 1

    Fuel Cell Vent Kit

    • Allows fuel cell to breathe out the vent port
    • Helps prevent fuel cell from being pressurized during use and while filing up
    • Keeps fumes out
    • Complete kit with 6 ft of 10AN Nylon Braided hose, all fittings, rollover valve, bulkhead and breather filter
    • Included rollover valve adds protection for vent
    • Anodized fittings prevent galling of threads and corrosion protection
    • Pump gas and E85 compatible
    View FUEL CELL VENT KIT

    Return Fitting Kit

    • Effectively routes returning fuel below surface level eliminating overhead splash
    • Minimizes erratic fuel pressures caused by turbulent flow and aeration of the fuel
    • Maintains consistent fuel pressure
    • Comes with fitting, hose and clamp
    • 10AN ORB port to 10AN male fitting made of 6061-T6 aluminum
    • Anodized fitting prevents galling of threads and corrosion protection
    • Corrugated tube is flexible to route around foam to bottom of fuel cell
    • Pump gas and E85 compatible
    View Fuel Cell Return Fitting Kit

    Fuel Cell Rollover Valve

    • Helps minimize and/or prevent fuel from coming out the vent port in case of a rollover
    • During normal operating conditions, valve allows fuel cell to breathe out the vent port
    • 10AN ORB port to 10AN male
    • Low-profile design
    • Main body made of 6061-T6 aluminum
    • Anodized fitting prevents galling of threads and corrosion protection
    • Stainless steel sphere ball and snap-ring
    • Comes apart easily to be cleaned/serviced
    • Pump gas and E85 compatible
    View Fuel Cell Rollover Valve

    0-90 ohm Fuel Gauge Sensor for 5 & 10 Gallon Cells

    • 0-90 Ohms (empty-full) works with most aftermarket gauges
    • Standard SAE 5-bolt mounting pattern
    • Tube design acts a damper for consistent readings
    • Save space and eliminate need for a float arm
    • Comes with gasket and mounting hardware, E85 compatible
    • 8-inch depth (PN: 19-227) for 5 & 10-gallon fuel cells
    • 9-inch depth (PN: 19-228) for 15 & 20-gallon fuel cells
    View Replacement Fuel Gauge Sender 5/10 Gallon

    0-90 ohm Fuel Gauge Sensor for 15 & 20 Gallon Cells

    • 0-90 Ohms (empty-full) works with most aftermarket gauges
    • Standard SAE 5-bolt mounting pattern
    • Tube design acts a damper for consistent readings
    • Save space and eliminate need for a float arm
    • Comes with gasket and mounting hardware, E85 compatible
    • 8-inch depth (PN: 19-227) for 5 & 10-gallon fuel cells
    • 9-inch depth (PN: 19-228) for 15 & 20-gallon fuel cells
    View Replacement Fuel Gauge Sender 15/20 Gallon

    Back To Top